Samsung SCB-3001 User Manual page 18

Operating Your Camera
CRT : Please select this menu item when using a
·
CRT monitor. You can change the PED level,
color gain in the sub menus.
USER : Please use this menu item when using a
·
monitor other than standard ones. You can
change the gamma, PED level and color gain
in the sub menus.
● VPS(Virtual Progressive Scan) : This is an advanced technology that reproduces a sharp
progressive image. This is appropriate to high quality recording and file transfer via the
Internet.
OFF : Selects 2:1 Interlaced Scan as the Imaging Method.
·
ON : Selects Progressive Scan as the Imaging Method.
·
● REVERSE : You can reverse the picture.
OFF : You don't reverse the picture.
·
H-REV : You can flip the picture horizontally on the screen.
·
V-REV : You can flip the picture vertically on the screen.
·
HV-REV : You can flip the picture horizontally and vertically on the screen.
·
● PIP(Picture in Picture) : Displays a full-size image along
with the thumbnail to provide more detailed
information. The position of the thumbnail is
adjustable.
● D-ZOOM : You can use a digital zoom of x1 ~ x16.
● FONT COLOR : You can change the OSD font color.
(White, Yellow, Green, Red, Blue)
● SHARPNESS : As you increase this value, the picture
outline becomes stronger and clearer.
Adjust this value appropriately depending
on the sharpness of the picture.
● RETURN : Select this to save the settings for the
IMAGE ADJ menu and to return to the
SPECIAL menu.
COLOR CCD CAMERA
34
User Guide
Notes
• W hen the V-REV or H-REV mode is enabled, the text on the screen does not flip.
• I f you increase the SHARPNESS level too high, the picture may become distorted or noise
may appear.
CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Function Setup button so that
the arrow indicates 'CAM TITLE'.
2) Set it to 'ON' by using the Function Setup
button.
3) Press the Function Setup button .
4) Use the Function Setup button to move
to a desired letter and select the letter by
pressing the Function Setup button.
Repeat this to enter multiple letters. You
can enter up to 15 letters.
5) Enter a title, move the cursor to 'POS' and press
the Function Setup button. The entered title
appears on the screen. Select the position to
display the title on the screen by using the
Function Setup button and press the Function
Setup button. When the position is determined,
select 'END' and press the Function Setup
button to return to the SPECIAL menu.
Notes
• W hen the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even
if you enter one.
• a nd Numbers are available in this mode.
• I f you move the cursor to CLR and press the Function Setup button, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
Function Setup button. Move the cursor over the letter to be edited, move the cursor to
the letter to be inserted and then press the Function Setup button.
COLOR CCD CAMERA
CAMERA TITLE SETUP
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
← → C L R P O S E N D
FRONT DOOR
35
User Guide