Samsung SCB-3001 User Manual page 12

Operating Your Camera
Notes
• A n item with the... icon also has sub menus. To select a sub menu, select an item with
the icon and press the Function Setup button.
• A n item with the --- icon is unavailable due to function settings.
LENS
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, select ' LENS' by using the Function Setup
button so that the arrow indicates 'LENS' .
2. Select the connected lens type by using the Function Setup button.
MAIN SETUP
1.LENS
2.EXPOSURE
DC/Video : Select Auto Iris Lens.
You can adjust the minimum shutter and maximum value of ESC shutter
mode when DC Lens mode is selected.
Manual : Select Manual Lens.
3. Each Lens mode has sub menu site as listed below.
- Brightness (DC, Manual) : Adjusts the video brightness.
- Level (VIDEO) : Adjusts the level of video iris signals; the higher the level,
the brighter the video looks.
- FOCUS ADJ (DC, VIDEO) : To adjust the DC and VIDEO lens focus correctly, you must
activate the Focus Settings mode under each lens menu. To
activate the Focus Settings mode, adjust the lens focus, and
then deactivate the settings mode. (The VIDEO lens requires
an extra step: go to the sub menu of the Focus Settings
mode and change the shutter speed to adjust the lens
brightness.)
- IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the control speed
is too slow or fast, please use this menu to adjust the speed.
COLOR CCD CAMERA
DC
22
User Guide
Notes
• W hen using VIDEO lens, adjust the lens VR explained below first and set the focus using
'FOCUS ADJ' menu.
• I f color rolling occurs when using a DC lens, set Shutter to ---.
• S ome lenses may not work properly, depending on the setting of the BRIGHTNESS LEVEL.
• When Using a Video-Type Auto Iris Lens
A djust the ALC adjustment terminal on the lens appropriately. In general, set it to AV
❶...... ...
(Average).
... I t may not work properly depending on the installed lens. Set the Level VR of the lens
2......
to the optimal value.
... S et AGC to OFF and adjust the Lens VR to an appropriate brightness.
3......
A djust the Lens VR, adjust the BRIGHTNESS, and then check if the screen brightness
4......
changes properly. Otherwise, adjust the Lens VR again.
EXPOSURE
MAIN SETUP
1.LENS
2.EXPOSURE
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function
Setup button so that the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup button.
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select the shutter.
- ESC : Select this to control the shutter speed automatically. If ESC is selected,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
COLOR CCD CAMERA
DC
25
ESC
HIGH
OFF
23
User Guide