Ph Wiring - Chamberlain T Owner's Manual

LOGIC CONTROL (VER. 2.0) 3 PHASE WIRING DIAGRAM
NOTE:
CONTACTOR 1PH / 3 PH JUMPER
SHOULD BE IN 3 PH POSITION
Notes:
1) See Owner's Manual for Dip Switch Functions and Programming Procedures
2) TO REVERSE MOTOR DIRECTION: INTERCHANGE ANY 2 OF THE 3 POWER
WIRES
AT L1, L2 & L3, OR EXCHANGE PURPLE & GRAY MOTOR LEADS AT BOARD
CONNECTIONS E17 & E6 (3PH UNITS ONLY).
**- Transformer Primary Voltage same as Line Voltage.
14
1837-3
380/460 VOLT MOTOR CONNECTION
230 VOLT MOTOR CONNECTION