Ph Wiring - Chamberlain T Owner's Manual

LOGIC CONTROL (VER. 2.0) 1 PHASE WIRING DIAGRAM
NOTE:
CONTACTOR 1PH / 3 PH JUMPER
SHOULD BE IN 1 PH POSITION
Note:
1) See Owner's Manual for Dip Switch Functions and Programming Procedures
2) TO REVERSE MOTOR DIRECTION
115 VOLTS: ALWAYS EXCHANGE PURPLE & GRAY ALL VOLTS & PHASES.
230 VOLTS: INTERCHANGE PURPLE (E10) & GRAY (E15) WIRES AT LOGIC BOARD.
* - BLUE WIRE MUST BE INSULATED ON 230V 1PH.
**- Transformer Primary Voltage same as Line Voltage..
13
1837-1
230 VOLT MOTOR CONNECTION
115 VOLT MOTOR CONNECTION