Kenmore 16657 - 3 Burner Grill Use And Care Manual page 20

Insert hinge pin on bottom of doors into hole in bottom shelf. Press upper hinge pin in front brace, align hinge hole on top of
door, and release hinge pin into door.
doo_
I
i!i!,i_i,i!iiiiiiii_i,lii
Hingepin
on bottom
of door
Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart right
side panel with the nut and cap, shown A.
Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the Electronic Ignition
Module. Total (4) connections.
Connect the two wires [(a) and (b)] from the switch wiring harness into the back of the Electronic Ignition Module.
Total (2) connections.
NOTE: Switchterminals are larger than electrode terminals and should only be installed in location shown as (a), (b).
Nut Cap
20.464261709