Kenmore 16657 - 3 Burner Grill Use And Care Manual page 19

Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and
facing the front. Secure using two l/4-20xllA '' screws, 7ram lock washers, and 7ram flat washers on each side.
1/4-20×11/2" screw
Qty.4
7ram Lockwasher 7ram flat washer
Qty.4 Qty.4
7ramflat 7ramlock 1/4-20×11/2"
washer washer screw
Inside of cart, insert rear shield tab into left slot on upper of lower back panel. Insert left and right grease tray rails into slots
beneath grease tray opening in upper back panel, shown A. Attach front shield tabs under front brace and attach right and
left rails under front brace with three #8x3/8" self-tapping screws, shown B.
Tank heat s hield
Note:someparts omitted
for clarity of illustration
#8x3/8"self-tappingscrew
Qty.3
Grease trayopening
464261709.19