Front/Back View - RocketFish RF-G1185 Quick Setup Manual

Thank you for purchasing this Rocketfish 4-port HDMI Selector. Your selector adds
up to four HDMI inputs to your system. This lets you connect four HDMI source
components, such as Blu-ray/DVD players, cable/satellite/DVR set-top boxes, and
gaming systems, to a single HDMI input jack on an HDTV or projector.
In addition to the flexibility of additional HDMI inputs, this product also provides
automatic HDMI port switching. The included remote control is for manual HDMI
port switching when needed.
Features
• Full HD 1080p video compatibility
• Auto HDMI port switching for simple operation
• HDCP compliant to ensure playback of any content
• DTS® HD, Dolby® TrueHD lossless digital audio compatibility
• One front panel HDMI input for easy connection of portable HDMI devices
• 3D video compatibility
• Gold plated connectors for maximum signal transfer and corrosion
resistance
• Remote control for manual HDMI port switching when needed
• Compatibility with CEC enabled HDMI components
NOTE: If you want to watch 3D sources, make sure that your TV or Projector
supports the same HDMI 3D video format as your sources. A 3D image cannot be
delivered to a TV or Projector that does not support 3D video formats. You also
need to use HDMI cables that are compatible with 3D video, such as Rocketfish
high-speed HDMI cables.
HDMI Input
(OPTION: Camcorder)
Front
INPUT 4 1 2 3
Power connector
Back
DC5V
OUTPUT INPUT 3
HDMI Output
(OPTION: HDTV or projector)
HDMI Input
(OPTION: Blu-ray Disc or DVD player)
Power/Select
Button (top)
Remote
4
INPUT 2 INPUT 1
HDMI Input
(OPTION: Game console)
HDMI Input
(OPTION: Cable/satellite/DVR set-top box)
Package contents
• 4-port HDMI Selector
• AC power adapter
Setting up your selector
1 Using high speed HDMI cables, such as Rocketfish brand HDMI cables,
connect the HDMI output on each source component to one of the HDMI
inputs on your selector.
OUTPUT
NOTE: If using this Selector with an A/V Receiver (AVR), connect the source
components to the AVR first, then connect the AVR HDMI output to the
Selector.
2 Connect a high speed HDMI cable from an available input on your HDTV (or
projector) to the HDMI output of your selector.
3 Connect the AC power adapter to the DC connector on your selector, then
plug the adapter into a power outlet.
Using your selector
1 Press the power button on the remote control or press and hold the
power/select button on your selector for at least two seconds.
2 Turn on your TV or projector, then switch to the HDMI input that your
POWER
selector is connected to. If you are uncertain how to switch inputs on the TV
ON/OFF
or projector, see the documentation that came with your TV or projector.
3 Turn on the HDMI source that you want to view. The auto-switching feature
1
of your selector should automatically switch to the HDMI input the device is
2 4
SELECT
connected to, and the LED for that input should light. However, some HDMI
MODES
source devices are not compatible with auto-switching technology. If your
3
selector does not automatically switch to the correct input, press the
number on the remote control you want to switch to, or repeatedly press
RF-G1185
the power/select button on your selector to toggle through the HDMI
inputs until the correct input is selected.
• Remote control and battery
• Quick Setup Guide
INPUT 3