RocketFish RF-WHD200 User Manual page 6

Transmitter back panel
Item Description
1 DC IN jack—Connect the power adapter to this jack.
2 Power switch—Turns the transmitter on or off.
3 HDMI/WVAN switch— A quick press (<1 second) toggles the HDMI switch input to select the next HDMI input.
A long press (>3 seconds) toggles WirelessHD output between one or more WirelessHD receivers in the same
room. See "Setting up a Wireless Video Area Network (WVAN)" on page 11.
4 HDMI 1 jack—Connect one end of an HDMI cable to this jack and the other end to your HDMI signal source.
5 HDMI 2 jack—Connect one end of an HDMI cable to this jack and the other end to your HDMI signal source.
6 HDMI 3 jack—Connect one end of an HDMI cable to this jack and the other end to your HDMI signal source.
7 HDMI 4 jack—Connect one end of an HDMI cable to this jack and the other end to your HDMI signal source.
Receiver back and side panels
Right side view
Item Description
1 HDMI jack—Connect one end of an HDMI cable to this jack and the other end to your TV or projector.
2 DC IN jack—Connect the power adapter to this jack.
3 Power switch—Turns the receiver on or off.
4 Cable routing clips - Insert HDMI cable into these clips for receiver placement stability.
6
Back view
Left side view