D-Link DGS-3224TGR - Switch User Manual page 88

The following parameters can be set, for IP:
Parameter
Profile ID
Auto Assign
Type
VLAN
DGS-3224TGR Gigabit Ethernet Switch User's Guide
Figure 6- 60. Access Profile Mask Setting – Add (IP) window
Description
Type in a unique identifier number for this profile set. This value can be set from 1 to
8.
Checking this box instructs the Switch to automatically assign a Profile ID.
Select profile based on Ethernet (MAC Address), IP address or packet content mask.
This will change the window according to the requirements for the type of profile.
IP instructs the Switch to examine the IP address in each frame's header.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
header.
Select Packet Content Mask to specify a mask to hide the content of the packet
header.
Selecting this option instructs the Switch to examine the VLAN part of each packet
header and use this as the, or part of the criterion for forwarding.
76