D-Link DGS-3224TGR - Switch User Manual page 86

DGS-3224TGR Gigabit Ethernet Switch User's Guide
Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a frame the switch
will examine, such as the MAC source address or the IP destination address. The second part is entering the criteria the
switch will use to determine what to do with the frame. The entire process is described below in two parts.
Figure 6- 58. Access Profile Mask Setting window
To create an Access Profile Mask:
To add an entry to the Access Profile Mask Setting window, click the New button. This will open an Access Profile Mask
Setting – Add window, as shown below. There are three Access Profile Mask Setting – Add windows; one for Ethernet
(or MAC address-based) profile configuration, one for IP address-based profile configuration and one for the Packet
Content Mask. You can switch among the three windows by using the Access Profile drop-down menu.
Use the Access Profile Mask Setting – Add windows to create access profiles and specify what criteria are used to
examine frames. Once a profile has been created, you can set up the rule applied to the profile as described later in this
section.
Figure 6- 59. Access Profile Mask Setting – Add (Ethernet) window
74