D-Link DGS-3224TGR - Switch User Manual page 57

The following parameters are used in the SNMP Group Table windows:
Parameter
Group Name
Read View Name
Write View Name
Notify View Name
Security Model
Security Level
DGS-3224TGR Gigabit Ethernet Switch User's Guide
Figure 6- 19. SNMP Group Table – Add window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP group of SNMP users.
This name is used to specify the SNMP group created can request SNMP messages.
Specify a SNMP group name for users that are allowed SNMP write privileges to the
switch's SNMP agent.
Specify a SNMP group name for users that can receive SNMP trap messages
generated by the switch's SNMP agent.
Use the pull-down menu to select the SNMP version. Select one of the following:
SNMPv1 – Specifies that SNMP version 1 will be used.
SNMPv2 – Specifies that SNMP version 2c will be used. The SNMP v2c supports both
centralized and distributed network management strategies. It includes improvements
in the Structure of Management Information (SMI) and adds some security features.
SNMPv3 – Specifies that the SNMP version 3 will be used. SNMP v3 provides secure
access to devices through a combination of authentication and encrypting packets over
the network.
Use the pull-down menu to select the SNMP version:
NoAuthNoPriv − Specifies that there will be no authorization and no encryption of
packets sent between the switch and a remote SNMP manager.
AuthNoPriv − Specifies that authorization will be required, but there will be no
encryption of packets sent between the switch and a remote SNMP manager.
AuthPriv − Specifies that authorization will be required, and that packets sent between
the switch and a remote SNMP manger will be encrypted.
45