D-Link DGS-3224TGR - Switch User Manual page 87

The following parameters can be set, for the Ethernet type:
Parameter
Profile ID
Auto Assign
Access Profile
VLAN
Source MAC
Destination MAC
802.1p
Ethernet Type
Port
DGS-3224TGR Gigabit Ethernet Switch User's Guide
Description
Type in a unique identifier number for this profile set. This value can be set from 1 to
8.
Checking this box instructs the Switch to automatically assign a Profile ID.
Select profile based on Ethernet (MAC Address), IP address or packet content mask.
This will change the window according to the requirements for the type of profile.
Ethernet instructs the Switch to examine the layer 2 part of each packet header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select Packet Content Mask to specify a mask to hide the content of the packet
header.
Selecting this option instructs the Switch to examine the VLAN identifier of each
packet header and use this as the full or partial criterion for forwarding.
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC
address.
Selecting this option instructs the Switch to examine the 802.1p priority value of each
packet header and use this as the, or part of the criterion for forwarding.
Selecting this option instructs the Switch to examine the Ethernet type value in each
frame's header.
The user may set the Access Profile Mask Setting window on a per-port basis by
entering a port number in this field. The port list is specified by listing the beginning
port number on that switch and the highest port number of the range. The beginning
and end of the port list range are separated by a dash. For example, 3-8 specifies all
of the ports between port 3 and port 8 − in numerical order. Entering all will denote all
ports on the Switch.
75