D-Link DGS-3224TGR - Switch User Manual page 61

Enter the information described below to download firmware from a TFTP server:
Parameter
Server IP Address
Path/File Name
Download Configuration from TFTP Server
A configuration file can be downloaded from a TFTP server to the switch. This file is then used by the switch to configure
itself.
Figure 6- 25. Download Configuration from TFTP Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of the firmware
file for the switch in the Path/Filename field. Click Download to initiate the file transfer.
Enter the information described below to download a configuration file from a TFTP server:
Parameter
Server IP Address
Path/File Name
Increment
DGS-3224TGR Gigabit Ethernet Switch User's Guide
Description
The IP address of the TFTP server.
The full file name (including path) of the setting file on the TFTP server.
Description
The IP address of the TFTP server.
The full file name (including path) of the setting file on the TFTP server.
Checking this box allows the switch to add the current configuration file to any
previously downloaded partial configuration files. If this box is not checked, the new
configuration file will completely replace the previous configuration file(s).
49