Dell PowerConnect 5324 Command Line Interface Reference Manual page 41

switchport access vlan
switchport access vlan
switchport trunk
allowed vlan
switchport trunk native
vlan
switchport general
allowed vlan
switchport general pvid
switchport general
ingress-filtering disable
switchport general
acceptable-frame-type
tagged-only
switchport forbidden
vlan
map protocol
protocols-group
switchport general map
protocols-group vlan
ip internal-usage-vlan
show vlan
show vlan internal
usage
show vlan protocols-
groups
show interfaces
switchport
switchport mode
Configures the VLAN membership mode of a port.
Configures the VLAN ID when the interface is in access
mode.
Adds or removes VLANs from a port in general mode.
Defines the port as a member of the specified VLAN, and
the VLAN ID is the "port default VLAN ID (PVID)".
Adds or removes VLANs from a general port.
Configures the PVID when the interface is in general
mode.
Disables port ingress filtering.
Discards untagged frames at ingress.
Forbids adding specific VLANs to a port.
Adds a special protocol to a named group of protocols,
which may be used for protocol-based VLAN assignment.
Sets a protocol-based classification rule.
Reserves a VLAN as the internal usage VLAN of an
interface.
Displays VLAN information.
Displays a list of VLANs being used internally by the
switch.
Displays protocols-groups information.
Displays switchport configuration.
Configures the VLAN membership mode of a port
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
VLAN
Configuration
Interface
Configuration
Interface
Configuration
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Privileged User
EXEC
Interface
configuration
(Ethernet, port-
channel)
41
Command Groups