Dell PowerConnect 5324 Command Line Interface Reference Manual page 46

interface range ethernet
interface range port-channel
interface range vlan
interface vlan
ip default-gateway
ip domain-lookup
ip domain-name
ip host
ip http authentication
ip http port
ip http server
ip https authentication
ip https certificate
ip https server
ip https port
ip igmp snooping (Global)
ip name-server
ip ssh port
ip ssh pubkey-auth
ip ssh server
lacp system-priority
line
logging
logging buffered
logging buffered size
logging console
46
Command Modes
Enters the interface configuration mode to configure multiple ethernet
type interfaces.
Enters the interface configuration mode to configure multiple port-
channels.
Enters the interface configuration mode to configure multiple VLANs.
Enters the interface configuration (VLAN) mode.
Defines a default gateway.
Enables the IP Domain Naming System (DNS)-based host name-to-
address translation.
Defines a default domain name, that the software uses to complete
unqualified host names.
Defines static host name-to-address mapping in the host cache.
Specifies authentication methods for http.
Specifies the TCP port for use by a web browser to configure the
device.
Enables the device to be configured from a browser.
Specifies authentication methods for https
Configures the active certificate for HTTPS. Use the no form of this
command to return to default.
Enables the device to be configured from a secured browser.
Configures a TCP port for use by a secure web browser to configure
the device.
Enables Internet Group Management Protocol (IGMP) snooping
Sets the available name servers.
Specifies the port to be used by the SSH server.
Enables public key authentication for incoming SSH sessions.
Enables the device to be configured from a SSH server.
Configures the system LACP priority.
Identifies a specific line for configuration and enters the line
configuration command mode.
Logs messages to a syslog server.
Limits syslog messages displayed from an internal buffer based on
severity.
Changes the number of syslog messages stored in the internal buffer.
Limits messages logged to the console based on severity.