Dell PowerConnect 5324 Command Line Interface Reference Manual page 318

Escape Sequence
Ctrl-shift-6 b
Ctrl-shift-6 c
Ctrl-shift-6 h
Ctrl-shift-6 o
Ctrl-shift-6 t
Ctrl-shift-6 u
Ctrl-shift-6 x
At any time during an active Telnet session, the Telnet commands can be listed by pressing the
Ctrl-shift-6 key, followed by a question mark at the system prompt: Ctrl-shift-6?
A sample of this list follows.
Console> 'Ctrl-shift-6' ?
[Special telnet escape help]
Esc B sends telnet BREAK
Esc C sends telnet IP
Esc H sends telnet EC
Esc O sends telnet AO
Esc T sends telnet AYT
Esc U sends telnet EL
Esc x suspends the session (return to system command prompt)
Several concurrent Telnet sessions can be opened and switched between them. To open a
subsequent session, the current connection needs to be suspended, by pressing the escape
sequence 'Ctrl-Shift-6' and 'x' to return to the system command prompt. Then open a new
connection with the telnet command.
Keywords Table
Options
/echo
/quiet
/source-interface
318
System Management
Purpose
Break
Interrupt Process (IP)
Erase Character (EC)
Abort Output (AO)
Are You There? (AYT)
Erase Line (EL)
Suspends the Session
Description
Enables local echo
Prevents onscreen display of all messages from the
software.
Specifies the source interface.