Table of Contents
Advertisement
Erasing the image displayed on the LCD monitor
While the image is displayed, you
can erase it by pressing the
ton (The Delete screen will be dis-
played.), press the four-way controller
( ) to select [Delete], and then
pressing the OK button.
Press the Playback button or press
the shutter release button halfway to
return to shooting status.
• When you turn the camera on while pressing the Playback
memo
button, the camera turns on in Playback Only mode. As
the lens does not extend in Playback Only mode, this fea-
ture is useful when you want to pass the camera to some-
one and show them the picture you have just taken. To
switch to the Capture mode, turn the camera off and then
turn it on again.
• You can enlarge the image displayed on the LCD monitor
by pressing the Zoom/
• When the screen is changed to the playback screen, the
image with the largest file number will be displayed first.
• In the case of movie pictures, the first frame will be dis-
played.
• If there are no images stored, the [No image] message
will be displayed.
Zoom Display
Adding a Voice Memo
but-
/
button.
p.89
p.90
File No.
100-0020
100-0020
Delete
Cancel
Exit
Exit
MENU
OK
Ok
Ok
27
Advertisement
Table of Contents
