Table of Contents
Advertisement
Troubleshooting
Problem
Battery is not installed
Power will not
come on
Battery is installed
incorrectly
Battery power is low
No image on the
LCD monitor is set to
LCD monitor
OFF
Connected to PC by
USB cable.
Camera is connected
to TV
Image is displayed but
is hard to see
Flash is charging
Shutter will not
be released
No available space on
SD Memory
Card/MultiMediaCard
Recording
Super Macro mode has
Zoom does not
been set.
work
Cause
Check battery is installed.
If not, install battery.
Check orientation of battery.
Reinsert battery with the label
towards front of camera. (p.13)
Insert a charged battery or use the
AC adapter.
Press Display button to turn LCD
monitor on. (p.38)
When connecting to PC, LCD
monitor is always On.
LCD monitor remains off while
camera is connected to TV.
Image on LCD monitor may be
hard to see when taking pictures
outside in sunlight.
When flash lamp blinks red, flash
is charging and no pictures can be
taken. Lamp lights red when
charging is completed.
Insert SD Memory Card/
MultiMediaCard with available
space or delete unwanted images.
(p.16, 96)
Wait until recording is finished.
The zoom is disabled in this
modes.
Remedy
147
Advertisement
Table of Contents
