Installing The Software - Pentax 18173 - Optio 550 Digital Camera Operating Manual

Installing the software

This section describes the procedures for installing the neces-
sary software.
Installing the USB driver
Installing the image processing software (ACDSee™ and
ACD photostitcher)
Installing the USB driver on Windows 98/98 SE only
If you are using Windows 2000, Windows Me or Windows XP,
you do not need to install the USB driver. When you connect the
camera to your computer with the USB cable, your computer will
automatically detect the camera as [Removable Disk].
z
Turn your computer on.
x
Insert the CD-ROM (S-SW7) into the CD-ROM drive.
c
Make sure the camera is turned off and connect it to
your computer with the USB cable.
Make sure that there is an SD Memory Card/MultiMedia
Card in the camera.
v
Turn your camera on.
Your computer will automatically detect the camera as new
hardware and the Wizard screen will appear.
p.105
p.110
105