Installing The Camera - Dell OptiPlex 9010 AIO Owner's Manual

Installing the Camera

1. Tighten the screws to secure the camera to the chassis.
2. Connect the camera cable and fix the latch.
3. Install:
a) display panel
b) system board
c) power-supply fan
d) heat-sink assembly
e) power supply unit
f) processor fan
g) converter board
h) power-button board
i) intrusion switch
j) hard drive
k) optical drive
l) WLAN card
m) input/output board shield
n) system-board shield
o) VESA mount bracket
p) back cover
q) VESA stand
4. Follow the procedures in
36
After Working Inside Your Computer .