HP dx7500 - Microtower PC Service & Reference Manual page 122

5. Rotate the drive cage all the way up.
Figure 8-23
6. Remove the two retainer screws that secure the drive to the bay (1) then slide the drive back and
out of the bay (2).
Figure 8-24
NOTE: To install an internal 3.5-inch hard drive, refer to
on page 113.
112 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Rotating the Drive Cage Up
Removing an Internal Hard Drive
Installing an Internal 3.5-inch Hard Drive