Telephone operation
Mounting bracket procedure
Wall mount to desktop installation
3. Position your hands as shown in Figure 8. Press your thumbs down on the tabs
that are below the bracket, holding it in place. Use your index fingers to move
the bracket towards yourself.
4. Tilt the top of the bracket towards you until it is resting on the telephone base.
5. Align the grooves of the bracket with the lower keeper tabs on the base. Make
Align the grooves of the bracket with the lower keeper tabs on the base. Make
sure the cords are pointing away from you as shown in Figure 9.
Figure 8. Detaching the bracket from the telephone base
Figure 9. Lower keeper tab location
Lower keeper tabs
14