Battery installation & charging Install the battery as shown below. After installing the battery, you can make and receive short calls. For optimal performance, charge the handset battery for at least 16 hours before use. When fully charged, the handset battery provides approximately five hours of talk time and three days of standby time.
Installation Your product may be shipped with a protective sticker covering the handset or base display, remove it before use. Install the telephone base close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat sur- face.
Telephone base and charger installation Telephone base installation Plug one end of the Plug the small end telephone line cord into the of the larger power telephone jack at the bot- adapter into the power tom of the telephone base. jack at the bottom of the telephone base.
Quick reference guide Handset DIR / MENU/SELECT Press to display direc- Press to display the menu. Once tory entries. Press to scroll up in the menu, press to select an while in menus. While enter- item or save an entry or setting. ing names or numbers, press to move the cursor to the right.
Quick reference guide Telephone base CHARGE On when the handset is charging in the telephone base. VOICEMAIL Flashes when you have IN USE new voice mail. This service is provided by • On when one of the handsets is your local telephone in use or when the answering company, (different from system is answering an incoming...