AT&T SL82318 - DECT 6.0 Digital Three Handset Answering System User Manual page 14

Getting started
Mounting bracket procedure
Desktop to wall mount installation
4. Tilt the top of the bracket away from you until it is resting on the telephone
base.
5. Align the grooves of the bracket with the upper keeper tabs on the telephone
base. Make sure the cords are pointing towards you as shown in Figure 4.
Upper keeper tabs
Figure 4. Upper keeper tab location
6. Slide the bracket away from you
until it clicks into the keeper
tabs. Bundle the telephone line
cord and power adapter cord,
and secure them with a twist tie.
Figure 5. Upper keeper tab location
7. Place the bundled telephone
cord and power adapter cord
inside the bracket as shown
below.
11