Connecting The Ethernet And Power Cables - Cisco 1242AG - Aironet - Wireless Access Point Hardware Installation Manual

Connecting the Ethernet and Power Cables

Connecting the Ethernet and Power Cables

The access point receives power through the Ethernet cable or an external power module.
shows the power options for the access point.
Figure 2-12
SYST 1
RPS 2
STAT UTIL DUPLX
SPEED
MODE
This product must be connected to a Power over Ethernet (PoE) IEEE 802.3af compliant power source
Warning
or an IEC60950 compliant limited power source. Statement 353
Caution This product and all interconnected equipment must be installed indoors within the same building,
including the associated LAN connections (as defined by Environment A of the IEEE 802.3af standard).
The access point power options:
•
•
•
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
2-20
Access Point Power Options
Option 1
Switch with
inline power
3
4
5 6
7
8 10Base -T
9 10 / 100Bas
11 e-TX
12
13
14 15
16
17
18 Cataly st 2950
19 20
21 SERIES
22
23 24 100Bas e-FX
23
24
Access Point
Option 1—Switches with sufficient inline power:
An inline power capable switch, such as the Cisco Catalyst 3550 PWR XL, 3560-48PS,
–
3750-48PS, 4500 with 802.3AF PoE module, or the 6500 with 802.3AF PoE module
Other inline power switches supporting the IEEE 802.3af inline power standard
–
Option 2—Switches without sufficient inline power can use the power injector:
Cisco Aironet Power Injector (AIR-PWRINJ3 or AIR-PWRINJ-FIB)
–
Option 3—Local power using the power module
Chapter 2 Installing the Access Point
Figure 2-12
Option 2
Switch without
inline power
SYST 1
RPS 2
3 4
STAT 5
UTIL DUPLX SPEED 6
7
8 9 10Base -T
MODE 10 / 100Bas e-TX
11
12 13
14
15
16
17 18
19 Cataly st 2950
20 SERIES
21
22 23 100Bas e-FX
24
23
24
Power injector
Power
cord
Universal
power supply
Option 3
OL-8371-05