Table of Contents
Advertisement
Obtaining the TFTP Server Software
Step 2
Set up a terminal emulator on your PC to communicate with the access point. Use the following settings
for the terminal emulator connection: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
Step 3
At the prompts, enter the administrator username and password. The default username is Cisco and the
default password is Cisco. The username and password are case sensitive.
Obtaining the TFTP Server Software
You can download TFTP server software from several web sites. Cisco recommends the shareware TFTP
utility available at this URL:
http://tftpd32.jounin.net
Follow the instructions on the website for installing and using the utility.
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
4-12
Chapter 4
Troubleshooting 1240AG Series Lightweight Access Points
OL-8371-05
Advertisement
Table of Contents
Troubleshooting
