Appendix B Mk2250 Rf Network Configuration; Overview; Automated Launch Of Aegis Client - Motorola MK2200-0N0SCKBWT0R - Micro Kiosk MK2200 Product Reference Manual

Appendix B MK2250 RF Network
Configuration

Overview

There are two alternative platform partitions available for the MK2250 that enable different RF clients to configure
the 11 Mbps wireless connection.
• To implement WPA enterprise-level wireless security in the wireless connection, use the Aegis Client version
2.1.4 to configure the wireless connection.
Alternatively, use Symbol Mobile Companion version 3.9.3.76.
•
NOTE Mobile Companion supports WPA Home, but not WPA Enterprise.

Automated Launch of Aegis Client

By default, the Aegis Client launches at startup and runs in the background on MK2250s using platform
partition 2250c42Plat64Mxxx.hex.
The AegisEnable.reg file included in this partition enables this. Deleting this file or renaming its .reg extension
causes Mobile Companion to launch upon boot up. In this case, to access Aegis Client double-tap its desktop
icon or press all four of the MK2250's buttons simultaneously. The Aegis Client icon then appears in the task bar;
select this to display its configuration window.
NOTE To use Mobile Companion on an RF unit, you must first disable Aegis Client or conflicts can occur.
To close the Aegis Client window but continue to run the application in the background, select
exit the application completely, select tab > .
Client Exit
tab > . To
Client Close