Modifying An Existing Configuration File; Retrieving And Modifying A Configuration File From An Mk22X0; Cloning An Mk22X0 Configuration File To Multiple Mk22X0S - Motorola MK2200-0N0SCKBWT0R - Micro Kiosk MK2200 Product Reference Manual

4 - 12 MK22X0 Series MicroKiosk for CE .NET 4.2 Product Reference Guide

Modifying an Existing Configuration File

To edit an existing configuration file:
From the RDM on the host computer, choose
1.
Configuration Utility
Select a configuration file (with a .reg extension) to edit and click OK.
2.
NOTE Only open files created by the RDM, System Menu, or Save Configuration. Loading other registry files can
cause file corruption.
Make the necessary changes to the default values in the configuration file. See
3.
3-6 for these options. Also see
MK22X0 Configuration Utility
To save the changes, choose
4.
the file. Note that you cannot change the Domain (product) of an existing configuration file.

Retrieving and Modifying a Configuration File from an MK22X0

From the
1. RDM
Select
2. Tools > Retrieve Remote Configuration File
the host computer. This launches the
unavailable in the device, RDM opens the
Make the necessary changes to the default values in the configuration file. See
3.
3-6 for these options. Also see
MK22X0 Configuration Utility
In the
4. MK22X0 Configuration Utility
transfer the updated configuration file back to the original MK22X0.
Alternatively, configure the RDM to automatically cold boot the MK22X0 device after a download completes.
5.
Select
Tools > Options
NOTE To reboot manually instead, in the RDM, select the MK22X0 device, then select Actions > Cold Boot.
Allow approximately one minute for the MK22X0 to reboot and reconnect, then select View > Refresh to
verify the device rebooted successfully.

Cloning an MK22X0 Configuration File to Multiple MK22X0s

To use one MK22X0 configuration file to configure other MK22X0s:
In the RDM, select the MK22X0 with the configuration file to use.
1.
Select
2. Tools > Retrieve Remote Configuration File
open the
MK22X0 Configuration Utility
In the
3. MK22X0 Configuration Utility
Specify the location for the configuration file to be saved on the host PC, and click OK.
4.
Select the MK22X0 devices to be updated from the
5.
window.
Figure 4-7
window data entry field types used when changing configuration options.
to overwrite the old file, or select
File > Save
screen, select the device from which to retrieve the configuration file.
MK22X0 Configuration Utility
Figure 4-7
window data entry field types used when changing configuration options.
window, select
to open the
RDM Options
window.
window, select
Tools > Open Local Configuration File
for a sample screen, and Data Entry Formats on page 4-27
to retrieve the MK22X0 configuration file from the MK22X0 to
window of the RDM. If a configuration file is
MK22X0 Configuration Utility
for a sample screen, and Data Entry Formats on page 4-27
File > Save to Remote Device
screen, and check
Auto reboot after download
to transfer the configuration file to the host computer and
.
File > Save As
Discovered Devices
to open the
MK22X0
Default Parameters on page
to specify a new name for
Save As
window with the default factory settings.
Default Parameters on page
to save the changes and
.
list.
for
for