Motorola MK2200-0N0SCKBWT0R - Micro Kiosk MK2200 Product Reference Manual page 65

System Configuration Default Parameters (Continued)
Table 3-5
System Configuration
Parameters
Network Time Update
Time Server
Refresh
Recovery Refresh
Threshold
Printer Configuration
Active Printer
Zebra QL Series
Zebra QL Series Flow Control
Description
Configuration of Simple Network Time Protocol client
(see Network Time Update: SNTP Client on page 8-10
Specifies the domain name of the time
server to contact for updates. If no
time server is set in the field, the time
service is disabled.
Do not set an IP address for this
parameter.
If the MK22X0 is unable to obtain a
time value from the time server, it
uses the default setting (June 1, 1999
12:00:00 PM), and does not
re-attempt to acquire a time value
unless a regular update is also
configured (the next attempt occurs at
the configured time).
Specifies the time period, in
milliseconds, between
synchronizations with the SNTP
server.
Specifies the time period, in
milliseconds, until next
synchronization, if the previous
synchronization attempt failed.
Specifies the interval between the
time on the SNTP server and the
current time in milliseconds. If the
difference between the SNTP server
time and the local system time is
larger than the specified value in
Threshold parameter, the update is
ignored.
Printer Configuration (see
Use this parameter to set the active
printer. Select the printer from the list.
Specifies the baud rate for the Zebra
QL Series printer if it is the selected
active printer.
Specifies the flow control of the Zebra
QL Series printer if it is the selected
active printer.
Configuration 3 - 13
Default
tock.usno.navy.mil
1209600000 (0x48190800 hex)
86400000 (0x5265c00 hex)
86400000 (0x5265c00 hex)
Printing on page 3-19)
Zebra (QL320, Cameo, Encore)
19200
No flow control
for details)