Setting The Sensitivity - Pentax 17116 - Optio M50 8MP Digital Camera Operating Manual

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
4
The sensitivity is automatically adjusted by the camera. (sensitivity 64 -
Auto
800)
64
100
• The lower the sensitivity, the less noise that affects the image. The
200
400
• Higher sensitivity settings use faster shutter speeds in low light
800
1600
3200
6400
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
98
Four-way controller
4 button
3 button
shutter speed will be slower in low light conditions.
conditions to reduce camera shake, but the image may be affected by
noise.
Rec.Mode
Recorded Pixels
MENU
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Exit
MENU
Rec.Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU Cancel
1/3
8
M
AWB
Auto
1/3
8
M
Auto
64
100
200
400
OK OK OK OK