First Steps
Charge the Battery
The camera is powered by an EN-EL9a rechargeable Li-ion battery (supplied). To
maximize shooting time, charge the battery in the supplied MH-23 quick charger
before use. About one hour and forty minutes are required to fully recharge the
battery when no charge remains.
X
1
Plug the charger in.
Insert the AC adapter plug into the battery
charger and plug the power cable into an
electrical outlet.
2
Remove the terminal cover.
Remove the terminal cover from the battery.
3
Insert the battery.
Insert the battery as shown in the illustration on
the charger. The CHARGE lamp will blink while the
battery charges.
4
Remove the battery when charging is
complete.
Charging is complete when the CHARGE lamp
stops blinking. Remove the battery and unplug
the charger.
16
Terminal
cover
Battery
Charging
charging
complete