Compaq Deskpro ap230 Hardware Reference Manual page 44

Computer Setup
Continued
Heading Option
Security Device Security
(continued)
Network Service Boot
System IDs
Support for Computer Setup options may vary depending on your specific hardware configuration.
Description
Enables/disables serial, parallel, and USB ports and
audio security.
Enables/disables the computer's ability to boot from
an operating system installed on a network server.
(Feature available on NIC models only; the network
controller must reside on the PCI bus or be
embedded on the system board.)
Allows you to set:
asset tag (16-byte identifier) and ownership Tag
(80-byte identifier displayed during POST)
See the Desktop Management guide for more
information
chassis serial number or Universal Unique
Identifier (UUID) number if current number is
invalid (these ID numbers are normally set in the
factory and are used to uniquely identify the
system)
keyboard locale setting (e.g., English or
German) for System ID entry
Hardware Reference Guide B-11
Continued