Compaq Deskpro ap230 Hardware Reference Manual page 41

Computer Setup
Heading
Storage
(continued)
Support for Computer Setup options may vary depending on your specific hardware configuration.
B-8 Computer Setup
Continued
Option
DPS Self-Test
Boot Order
Description
Allows you to execute self-tests on IDE hard drives
capable of performing the Drive Protection System
(DPS) self-tests.
Note: This selection will only appear when at least
one drive capable of performing the IDE DPS self-
tests is attached to the system
Allows you to specify the order in which attached
peripheral devices (such as diskette drive, hard drive,
CD-ROM, or network interface card) are checked for
a bootable operating system image. Each device on
the list may be individually excluded from or included
for consideration as a bootable operating system
source. For systems with more than one attached
diskette or disk drive, a submenu allows you to
specify the order in which the devices are assigned
drive letters.
Note: MS-DOS drive lettering assignments may not
apply after a non-MS-DOS operating system has
started.
To boot one time from a device other than the
default device specified in Boot Order, restart the
computer and press F9 when the F10=Setup
message appears on the screen. When POST is
completed, a list of bootable devices is displayed.
Use the arrow keys to select a device and press the
Enter key.
Continued