Compaq Deskpro ap230 Hardware Reference Manual page 29

Compaq deskpro workstation ap230 hardware reference guide

Hide thumbs Also See for Deskpro ap230:

Table of Contents

2-22 Hardware Upgrades

Install two guide screws on each side of the adapter

Install the adapter in the desired drive bay

front of the drive cage; the drivelock automatically secures the

adapter when it snaps into place.

The primary 3.5-inch diskette drive should only be installed

into bay 3. Bay 3 is the bottom bay in the minitower

configuration and the topmost bay in the desktop configuration.

Aligning the Guide Screws and Installing an Adapter with a 3.5-Inch Drive

by sliding it into the

Table of Contents