Setting The Keyboard Options - Epson Equity 386/33 PLUS Setup Manual

You can also set the processor to change speed automatically.
This enables the computer to switch to slow speed whenever it
needs to access a diskette but run at fast speed for all other
operations. When it runs at fast speed, the
front panel is illuminated.
You may not want to use the Automatic setting for certain
copy-protected programs. See "Changing the Processor
Speed" in Chapter 2 of the User's Guide for more information.
You can also change the speed temporarily by giving a
keyboard command or by running the ESPEED program.
See "Changing the Processor Speed" in Chapter 2 of the
User's Guide for more information.

Setting the Keyboard Options

There are four options for the keyboard: Test, NumLock,
Key rate, and Key delay. The table below describes the settings
available.
Keyboard options
Option
Test
NumLock
Key rate
Key delay
Indicates the default setting
l
Description
Settings
Tests keyboard at power-on
Enabled*
Skips keyboard test at power-on
Disabled
Determines initial NumLock status when
On'
system is turned on or reset
Off
Sets rate at which a character repeats
2-30
(characters when key is held down; default is 10.9
per second)
Sets period of delay between the time a
0.251
key is pressed and the character
(seconds)
appears on the screen; default Is 0.50.
Running the SETUP Program
light on the
TURBO
2-15