Epson Equity 386/33 PLUS Setup Manual page 15

Before you set up your computer, choose a convenient location
that provides the following:
A sturdy desk or table strong enough to support the weight
of your system and its components.
A flat, hard surface. Soft surfaces like beds and carpeted
floors attract static electricity, which can erase data on your
disks, damage the computer's circuitry, and prevent proper
ventilation.
Good air circulation. Leave several inches of space around
the computer so air can move freely.
Moderate environmental conditions. Select a cool, dry area
and protect your computer from extremes in temperature,
humidity, dust, and smoke. Avoid direct sunlight or other
sources of heat.
Appropriate power sources. To prevent static charges,
connect all your equipment to three-hole, 120-volt, grounded
outlets. You need one outlet for the computer, one for the
monitor, and additional outlets for a printer and any other
peripheral devices.
No electromagnetic interference. Do not place your system
too close to any electrical device, such as a telephone, which
generates an electromagnetic field.
1-2 Setting Up Your System