Removing A Memory Card Or Blank - Dell Vostro 1500 Owner's Manual

CAUTION:
safety instructions in the
To install a memory card:
1 Hold the card with the top side of the card facing up.
2 Slide the card into the slot until the card is completely seated in its
connector.
If you encounter too much resistance, do not force the card. Check the
card orientation and try again.
The computer recognizes the memory card and automatically loads the
appropriate device driver. If the configuration program tells you to load the
manufacturer's drivers, use the media that came with the memory card, if
applicable.

Removing a Memory Card or Blank

CAUTION:
safety instructions in the
NOTICE:
Use the memory card configuration utility (click the
notification area) to select a card and stop it from functioning before you remove it
from the computer. If you do not stop the card in the configuration utility, you could
lose data.
Press the card into the slot to release it from the card reader. When it is
partially ejected, remove the card.
96
Using the Memory Card Reader
Before you begin any of the procedures in this section, follow the
Product Information Guide
Before you begin any of the procedures in this section, follow the
Product Information Guide
.
.
icon in the