1
hard drive bezel
3
hard drive
Replacing the Hard Drive
1 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
excessive force, you may damage the connector.
2 Slide the hard drive bezel that you took off the old hard drive onto the new
hard drive, and fasten the two hard-drive bezel screws.
3 Slide the hard drive into the hard drive bay until it is fully seated.
4 Replace and tighten the hard drive screws.
5 Install the operating system for your computer, as needed (see "Restoring
your Microsoft Windows Operating System" on page 150).
6 Install the drivers and utilities for your computer, as needed (see
"Reinstalling Drivers and Utilities" on page 146).
166
Adding and Replacing Parts
1
Use firm and even pressure to slide the drive into place. If you use
2
2
hard-drive bezel screws (2)
3