Send By Transferjet - Sony DSC-WX50 Cyber-shot User Manual

Cyber-shot User Guide
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Send by TransferJet

Send by TransferJet

Receiving images using TransferJet
Using separately sold TransferJet-compatible devices
TransferJet is a close-up, wireless transfer technology that allows data to be transferred by closely
aligning two products that you want to communicate with each other.
To find out whether your camera is equipped with the TransferJet function, check for the
(TransferJet) mark on the bottom of the camera.
Using a Memory Stick with TransferJet (sold separately) allows images to be transferred between
TransferJet-compatible devices.
For more details on TransferJet, see the operating instructions supplied with Memory Stick with
TransferJet.
1. Insert a Memory Stick with TransferJet into the camera.
2. Press the
(Playback) button to switch to playback mode.
3. MENU
(Send by TransferJet)
4. Transfer images by closely aligning the
A notification sound is emitted when connection is made.
Sends the currently displayed image in single-image mode.
(This Image)
You can select and send multiple images.
After step 3, select an image to be sent, then press
(Multiple Images)
To cancel the selection, press
MENU
Notes
Only still images can be transferred.
Up to 10 images can be transferred at once. However, for 3D images, both the MPO file and the
JPEG file are transferred. Depending on the receiving device, up to 20 images are received.
Set [TransferJet] to [On] in
On an airplane, set [TransferJet] to [Off] in
the place where you use.
The connection is cut if transfer cannot be made within about 30 seconds. If this happens, select
[Yes] and realign the two
The Memory Stick with TransferJet and camera models with TransferJet are not sold in some
countries and regions due to local laws and regulations.
Set the [TransferJet] function to [Off] in countries and regions other than where you purchased your
camera. Depending on the country or region, if you use the TransferJet function, you may be liable
due to local restrictions on transmission of electromagnetic waves.
Receiving images using TransferJet
1. Press the
(Playback) button to switch to playback mode.
2. Closely align the
(TransferJet) marks on the camera and sending device to receive images.
A notification sound is emitted when connection is made.
desired mode
(TransferJet) marks on the camera and other device.
again to cancel the
[OK]
(Settings). [Details]
(Settings) [Details]. In addition, follow the rules of
(TransferJet) marks on the camera and another device.
Search Print
Search
on the control wheel
.
mark.