Sony DSC-WX50 Cyber-shot User Manual page 150

Cyber-shot User Guide
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Protect
Protect
Protects recorded images against accidental erasure.
The mark is displayed for registered images.
1. Press the
(Playback) button to switch to playback mode.
2. MENU
(Protect)
3. [OK]
Protects the currently displayed image in single-image mode.
(This Image)
You can select and protect multiple images.
(Multiple Images)
To cancel the selection, press
Protect all images in the selected burst group at once in Display Cont.
(Set All Cont.
Shooting Group mode.
Shooting Imgs.)
Release all protected images in the selected burst group at once in Display
(Rmv. All Cnt.
Cont. Shooting Group mode.
Shoot. Images.)
Note
When the internal memory is used to record images, View Mode is set to Folder View.
To cancel the protection
Select the image for which you want to cancel protection, and unlock it by pressing
wheel as the same procedure to protect it. The
Copyright 2012 Sony Corporation
desired mode on the control wheel
After step 2, select an image to be protected, then press
MENU [OK]
indicator disappears, and the protection is released.
Search
Search
again to cancel the mark.
on the control
Print
.
Back to top