Send By Transferjet - Sony Cyber-shot DSC-HX100 User Manual

Cyber-shot User Guide
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Send by TransferJet

Send by TransferJet

Receiving images using TransferJet
Using separately sold TransferJet-compatible devices
TransferJet is a close-up, wireless transfer technology that allows data to be transferred by
closely aligning two products that you want to communicate with each other.
To find out whether your camera is equipped with the TransferJet function, check for the
(TransferJet) mark on the bottom of the camera.
Using a Memory Stick with TransferJet (sold separately) allows images to be transferred
between TransferJet-compatible devices.
For more details on TransferJet, see the operating instructions supplied with Memory Stick with
TransferJet.
1. Insert a Memory Stick with TransferJet into the camera.
2. Press the
(Playback) button to switch to playback mode.
3. MENU
(Send by TransferJet)
4. Transfer images by closely aligning the
device.
A notification sound is emitted when connection is made.
Sends the currently displayed image in single-image mode.
(This Image)
You can select and send multiple images.
After step 3, perform the following.
Select an image then press
(Multiple Images)
Repeat the above step until there are no more images to be sent.
Select an image with a
MENU
Notes
Only still images can be transferred.
Up to 10 images can be transferred at once. However, for 3D images, both the MPO file
and the JPEG file are transferred. Depending on the receiving device, up to 20 images are
received.
Set [TransferJet] to [On] in
On an airplane, set [TransferJet] to [Off] in
rules of the place where you use.
The connection is cut if transfer cannot be made within about 30 seconds. If this happens,
select [Yes] and realign the two
Memory Stick with TransferJet and camera models with TransferJet are not sold in some
countries and regions due to local laws and regulations.
Set the [TransferJet] function to [Off] in countries and regions other than where you
purchased your camera. Depending on the country or region, if you use the TransferJet
function, you may be liable due to local restrictions on transmission of electromagnetic
waves.
173
desired mode
(TransferJet) marks on the camera and other
.
mark to release the
[OK]
(Settings). [Details]
(Settings) [Details]. In addition, follow the
(TransferJet) marks on the camera and another device.
Print
on the control button
mark.