Table of Contents
Advertisement
1. Press
USB Tethering and Mobile HotSpot.
For more information, refer to "Tethering" on page 224.
For more information, refer to "Mobile HotSpot" on
page 225.
Near Field Communication
This feature is used to read and exchange tags. When used
in conjunction with Android Beam, your device can be used
to beam application content when NFC-capable devices are
touched.
1. Press
2. Tap the NFC field. A check mark displayed next to the
feature indicating it is enabled.
Note: Enabling NFC also enables Android Beam.
239
and then tap Settings
More...
and then tap Settings
More....
Android Beam
This feature (when activated via NFC) allows you to directly
beam application content to another NFC-capable device
when they are in direct contact. These files are typically
small such as Calendar and Contact entries.
1. Press
2. Verify the NFC feature is active.
3. Tap Android Beam and make sure the feature is turned
on.
4. If not already active, in a single motion touch and slide
the Android Beam slider to the right to turn it on
ON
.
5. Complete the transfer process between the two
NFC-enabled devices by placing them back to back.
and then tap Settings
More...
Advertisement
Table of Contents
