Data Usage - Samsung Galaxy S II SGH-T989 User Manual

Scanning for Devices
This option allows you to scan for active Bluetooth devices so
you can pair with them.
1. Press
2. From the bottom of the Bluetooth settings page, tap
Scan for devices to search for visible external
Bluetooth-compatible devices such as headsets,
devices, printers, and computers.
Important! Some Bluetooth devices are secured and require a
PIN number to confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required,
and tap OK.

Data Usage

Monitor and mange your device's data usage capabilities.
Features include activation/deactivation or network data
usage, set mobile data usage for a set period of time, and
view application data usage.
1. Press
and network Data usage.
235
and then tap Settings Bluetooth.
and then tap Settings Wireless
To activate/deactivate Mobile data usage:
1. Press
and network Data usage.
2. In a single motion touch and slide the Mobile data slider
OFF
to the right to turn it on
3. In a single motion touch and slide the Mobile data slider
ON to the left to turn it off
To set a mobile data limit:
1. Press
and network Data usage.
2. Place a check mark in the Set mobile data limit field.
3. Read the on-screen disclaimer info and tap OK.
4. Touch and drag the far right ends of the Red or Orange
horizontal lines to manually adjust both the Warning
and Maximum data limits.
5. Touch and drag the bottom grey vertical lines to adjust
the time frames.
6. Tap the Data usage cycle button and select either the
current cycle or define your own by selecting Change
cycle.
and then tap Settings Wireless
ON
OFF
.
and then tap Settings Wireless
.