Find Waypoints - Eagle FishElite 642c Installation And Operation Instructions Manual

If you want to navigate to the found intersection, just press
| |
MENU ENT EXIT

Find Waypoints

1. Press |↑ to
WPT
2. If searching for the nearest waypoint, select
searching by name, highlight
jump to step 5.)
Find By Nearest command (left). Find by Name command (center).
3. When you are searching for the nearest waypoint, a list of waypoints
appears with the closest location highlighted at the top of the list and
the one furthest from you at the bottom of the list.
4. To see location information on the closest waypoint, press
Waypoint Information screen appears.
A. To navigate to the waypoint, press
command is already highlighted. The unit will show navigation in-
formation to the waypoint.
B. To find the waypoint, press ↓ to
appears with the cursor highlighting the found waypoint.
To clear these menus and return to the main page display, press
repeatedly.
5. If you are looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ ↓ to change the first let-
ter, then press → to move the cursor to the next letter and repeat until
the name is correct, then press
the lower selection list by pressing
point from the list, then press
appears.
.
M W
Y AYPOINTS
N
List of the nearest waypoints (right).
| .
ENT
and press
AME
ENT
F O
IND
| . B. Or you can jump down to
ENT ENT
, then press ↓ ↑ to select a way-
ENT
. The waypoint information screen
ENT
172
and press
N
EAREST
. (To search by name,
ENT
. The Go To Waypoint
| . The Map Page
M ENT
N AP
. If
ENT
and the
ENT
EXIT