Delete A Route - Eagle FishElite 642c Installation And Operation Instructions Manual

Route creation sequence, continued: Fig. 4. Point (3) set at channel mouth.
Fig. 5. Waypoint (4) set further south along the beach, at a recognizable
landmark. The route will end with waypoint 5 at an oil platform. Fig. 6.
Press EXIT to save the route and you return to this screen.
6. Move the cursor to the next point in the route, a spot where you need
to turn or change direction and press
7. Repeat step six until the route reaches your destination.
8. To save your route, press
screen, with the route automatically named "Route 1" and stored in the
unit's internal memory.
You can edit the route and run other commands, but if you are finished
with the route for now, return to the main page display by
pressing
EXIT
NOTE:
When adding waypoints to an existing route, the inserted way-
points will appear in the route in front of the waypoint you have
selected in the Edit Route menu. To insert waypoints at the end of
the route, make sure to select

Delete a Route

1. From the
press |
MENU MENU
2. Press ↓ to saved route name|
3. Highlight
D
To Delete All Routes at Once:
1. From the
press |
MENU MENU
2. Highlight
D
4.
repeatedly.
N P
AVIGATION AGE
|↓ to
R
OUTE
| |← to
ENT
ELETE
N P
AVIGATION AGE
|↓ to
R
OUTE
|
A ENT
ELETE LL
5.
ENT
. The unit reverts to the Edit Route
EXIT
(E R
ND OF
, press
MENU
|
P ENT
LANNING
.
ENT
| .
Y ENT
ES
, press
MENU
|
P ENT
LANNING
|← to |
Y ENT
ES
122
to set the next waypoint.
before adding them.
)
OUTE
| or from the
ENT
.
| or from the
ENT
.
.
6.
M P
AP AGE
M P
AP AGE