Selecting A Waypoint; Set A Waypoint By Average Position; Set A Waypoint By Projecting A Position - Eagle FishElite 642c Installation And Operation Instructions Manual

2. Latitude: press → to
acter, then press → to the next character and repeat until the latitude
is correct. Press
3. Longitude: press ↓ to
character, then press → to the next character and repeat until the lon-
gitude is correct. Press
repeatedly.
EXIT

Selecting a Waypoint

To select a waypoint on the map center the cursor crosshairs on the
waypoint. A red border will appear around the waypoint.

Set a Waypoint by Average Position

A waypoint set by average position is created after several position
readings have been averaged. This boosts waypoint position accuracy
by helping to eliminate errors caused by atmospheric conditions and
other factors.
1. Press |↑ to
WPT
2. Press ↓ ↑ to
3. Wait while the unit takes points to get an average for the position. The
greater the number of points, the greater the accuracy. When the desired
number of points accumulates, press
4. The Edit Waypoint menu appears. Press
to the main page display.

Set a Waypoint by Projecting a Position

This feature creates a waypoint at a location a specific distance and
bearing from a reference position. The reference position can be a way-
point, map feature or Point of Interest.
1. Press |↑ to
WPT
2. Press ↓ to
P
3. Select
C
HOOSE
ture or Point of Interest. When a selection has been made press
Press →, ↑ ↓ to choose a subcategory, then press
| . Spell out the name of the desired reference point in the Find
N ENT
AME
By Name box or press
you have selected a point, press
information window. Highlight
L
ATITUDE
.
EXIT
L
ONGITUDE
EXIT
M W
Y AYPOINTS
A P
VERAGE OSITION
M W
Y AYPOINTS
P
ROJECTED OSITION
|
R ENT
EFERENCE
to the find the point in the list below. After
ENT
. Press ↑ ↓ to change the first char-
|
ENT
. Press ↑ ↓ to change the first
|
ENT
. To return to the main page display, press
|→ to |
N
EW
|press → to
|
ENT
to create the waypoint.
ENT
|→ to |
N
EW
| |→ to
ENT
. Use ↑ ↓ to select a waypoint, map fea-
. That will launch the waypoint
ENT
S R
ET EFERENCE
128
.
ENT
|
C
REATE
repeatedly to get back
EXIT
.
ENT
| .
C ENT
REATE
and press
ENT.
.
ENT
ENT.
. Highlight
ENT