Navigate To A Waypoint - Eagle FishElite 642c Installation And Operation Instructions Manual

4. Press ↓ to
change the first character, then press → to the next character and repeat
until the longitude is correct. Press
previous page display. The waypoint is saved and automatically given a
name with a sequential number, such as waypoint 001. The waypoint
symbol and number appear on the map and in the waypoint list.

Navigate To a Waypoint

You can select any waypoint on the Map Page with the cursor, then use
the Navigate to Cursor command (we will describe how later in this
section.) You, however, can avoid scrolling the map to pick your way-
point if you use the Find Waypoint commands.
1. Press |↑ to
WPT
press ↓ to
N
EAREST
tire waypoint list — press ↓|
2. If your waypoint list is a long one, you can spell out the waypoint name
in the
F B N
IND Y
→ to move the cursor to the next character and repeat until the name is
correct, then press
3. If the list is short, you can jump directly to the
. Use ↑ ↓ to select the waypoint name, press
pressing
ENT
waypoint information screen appears with the
4. To begin navigating to the waypoint, press
Course line
(red)
Off course
range, set at
0.20 mile
Navigating to waypoint 002 and leaving a trail.
|
L ENT
ONGITUDE
M W
Y AYPOINTS
| . To look by name — and scroll through the en-
ENT
box. Press ↑ ↓ to change the first character, then press
AME
to jump to the list below.
ENT
. Enter the longitude by pressing ↑ ↓ to
, then
ENT
| . To look up the nearest waypoint,
ENT
. For this example, let's look by name.
ENT
105
| to return to the
EXIT EXIT
F I
IND N
command selected.
G T
O O
.
ENT
Trail line
(magenta)
Destination
name
box by
L
IST
and the
ENT