Find An Intersection - Eagle FishElite 640c Installation And Operation Instructions Manual

The Find Streets menu with the Find First Street command high-
lighted (left). Streets Found list (center). Map Page showing results of
a street search (right). The cursor points to the located street.
3. The Find Streets menu reappears with the street you are searching for
in the First Street box. To search for that street, press ↓ to
When the Streets Found list appears, press ↑ ↓ to select the
|
S ENT.
TREET
street you are searching for and press
4. The Map Page appears, with the cursor pointing to the found street.
If you want to navigate to the found street at the cursor location, just
press |
MENU ENT

Find an Intersection

You must enter one street in the First Street dialog box and enter the
next street in the Second Street dialog box.
1. From the Map Page, press
Streets Menu appears.
2. You must fill in a street name in the First Street dialog box. Press
to display the Find By Name menu. There are two options: A. You can
spell out the street in the top selection box. Press ↑ ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat until
the name is correct and press
lower box and pick a street from the selection list. Press
↓ ↑ to select a street from the list and press
3. The Find Streets menu reappears with the street you are searching
for in the First Street box.
4. Now fill in the second street. Press ↓ to
Find By Name menu appears again. Just like before, there are two op-
tions: A. You can spell out the second street in the top selection box.
Press ↑ ↓ to change the first letter, then press → to move the cursor to
the next letter and repeat until the name is correct, then press
| .
EXIT
MENU
ENT
.
ENT
|↓ to
F S
IND TREETS
| . B. Or you can jump down to the
ENT
.
ENT
S
ECOND
170
F
IND
| and the Find
ENT
, then use
ENT
| and the
S ENT
TREET
F
IRST
ENT