Eagle FishElite 640c Installation And Operation Instructions Manual page 131

2. Press ↑ to
, then press . (To add to an existing route,
N R ENT
EW OUTE
press ↓ ↑ to route name|
.)
ENT
3. Press ↓ to
| |↓ to | . The Map Page
E R ENT A F M ENT
ND OF OUTE DD ROM AP
appears with the cursor showing.
Edit Route menu (left). Edit Route Waypoints menu (right)
with Add From Map command selected.
4. Use the Zoom and arrow keys to move the map and cursor until the
cursor is centered on the spot where you want your route to begin.
5. To set the first route waypoint press . In the example below, we
ENT
moved to the entrance of the cove where our boat was docked.
3.
1. 2.
Route creation sequence (from left to right): Fig. 1. Set route waypoint
(1) at the cove entrance. Fig. 2. Move cursor northeast to set point (2)
at channel entrance. Fig. 3. With point (2) set, move cursor southeast to
mark channel exit with waypoint (3). In figures 2 and 3, notice the
rubber band line extending from the previously set waypoint to the
cursor. This line will become the course for the route.
123