Eagle FishElite 640c Installation And Operation Instructions Manual page 124

You must enter which way you want to transfer data, from an MMC
card to the unit (load) or from the unit to an MMC card (save).
GPS data automatically recorded in the unit's internal memory must be
saved to the MMC (as a GPS Data File) in order to store it on your per-
sonal computer. GPS Data Files stored on an MMC must be copied from
the card to the unit's internal memory before the unit can read them.
1. Insert the MMC into your unit. Press
| |↓ to
S ENT
ETUP
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must insert a card
into the unit to activate the Load or Save commands.
To transfer data from the unit to the MMC: press
To transfer data from the MMC to the unit: press → to
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ ↓ to change the first character, then press → to the next char-
acter and repeat until the name is correct. Then press
| .
D ENT
ATA
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press .
EXIT
T M D
RANSFER Y ATA
S D
AVE ATA
| .
ENT
| . If you want to rename the file (as
ENT
to activate the selection box.
ENT
116
| |↓ to
MENU MENU
ENT
ENT
S
YSTEM
(for .)
S
AVE
| .
L ENT
OAD
|↓ to
S
AVE